Our largest grab at work in the port of Fos-sur-Mer

Published On: November 9th, 2026

The largest grab ever built in our workshop left for HES MED TERMINALS in June. It now unloads scrap barges in the port of Fos-sur-Mer, on the French Mediterranean coast. Here is its journey, from our workshop in the Meuse to the quayside.

In the workshop

This four-rope mechanical orange peel grab has eight shells. Our design office developed it for rehandling bulk scrap at a port terminal. At 17.8 tonnes and 5.76 m open, it is the largest piece ever built in our workshop at Les Souhesmes-Rampont, eastern France.

Building it required heavy plate and complex welded assemblies in Quard and Quend high-performance steels from the steelmaker NLMK. The first welds date from early April. In early May, the head and arms were assembled on the overhead crane while the eight shells were put together on the shop floor.

Welding a grab sub-assembly in the IEV workshop
The grab's eight shells assembled on the shop floor
Assembling the grab's head and arms on the overhead crane

On 27 May, once assembly was complete, the grab was hung from the workshop’s overhead crane for its closing and opening tests.

IEV orange peel grab, closed, on the workshop overhead crane
IEV grab, 5.76 m open, closed, next to a workshop team member
Closing and opening test in the workshop, 27 May 2026

On the road

On 8 June, the grab was loaded onto the low-loader of an oversized convoy. Closed, it measures 3.93 m in diameter and about 5.8 m in height: it travelled lying on its side, from the Meuse down to Fos-sur-Mer.

IEV grab lying on the low-loader, ready to leave
Oversized convoy carrying the IEV grab leaving Les Souhesmes-Rampont

At work in the port of Fos-sur-Mer

On 1 July, the HES MED TERMINALS team filmed it unloading a barge. The video shows a full cycle: the bite in the hold, the lift, the swing over the quay and the discharge onto the stockpile. Each bite carries nearly 10 m³ of scrap.

Unloading a scrap barge in Fos-sur-Mer, 1 July 2026. Video: HES MED TERMINALS

Our thanks to the HES MED TERMINALS team for these images.

Back in 2020, a 38 m³ IEV port grab had already made the trip to Fos-sur-Mer. Our port grabs and clamshells are presented in our port range. To discuss a grab or clamshell matched to your crane and your material, contact us.

Specifications

Type Four-rope mechanical orange peel grab
Number of shells 8
Weight 17,756 kg
Capacity approx. 10 m³
Open diameter 5,756 mm
Closed diameter 3,930 mm
Height 5,821 mm
Steels Quard and Quend (NLMK)
Application Scrap rehandling, barge unloading
Customer HES MED TERMINALS, Fos-sur-Mer